Spiral classifiers are widely used for distributing ore in the close circuit with ball mill, grading ore and fine slit in the gravity mill, grading granularity in the flow of metal ore-dressing and desliming and dehydrating in the washing. Advantages are simple structure, reliable working condition and convenient operation.

1) How to install Spiral classifier?

The inspection machine was no damage, no loose screws, you can install. Spiral Classifier should be securely installed in the pouring of concrete on the basis of good. Basic design should have a good supporting role, the screw to minimize shear forces.

Operation of the classifier structure and principle of clear, before manipulation of the machine.

2) How to maintain Spiral classifier?

a. the bearing lubrication every 4 hours to dry by hand to the bearing pressure injection pump high pressure oil, to keep bearing the seal performance.

b. where the grease lubrication points are sodium or calcium base grease lubrication.

c. the class should see whether the gear oil inside the needle carved line, every 6 months for second oil.

d. should always check the lower part of the middle frame bearing or bearing, bearings, seals for wear, bearing is damaged, so that timely replacement.

Pre: Some Factors That May Affect the Production Capacity of Rotary Kiln

Next: Factors of Affecting Permanent Magnetic Separator